SUPERIOR HELMETS

Each model is developed from concepts of optimizing physical performance while utlizing select materials that produce timeless ride-holding emotions and immeasurable comfort for the wearer, with the patented "Air Control System" of ventilation developed by Kep.  For this reason Kep Hats comply with the high safety requirements of the following standards: CE e SEI-ASTM safety rules and manufacturing processes will be in a very near future certified ISO 9004-2000. Be superior means to aim to the best.

The helmet design for Kep Hats is another fundamental factor because it is more evident, what immediately stikes and conquer the public.

To fall in love with Kep Hats helmet is easy and to consider it irreplaceable is an inevitable consequence.

GRILLE

The front grille has an air control system through the delicate moving up and down of the central switch. The polystyrene foam to guarantee a major protection in case of penetration of insects.

The frame of the hardhat is the perfect co-ordination of the three interconnecting parts that leave sinuous paths for great air circulation.

The high-tech polystyrene is in double density foan for a better shock absorption.

AIR CONFLUENCE

The perfect and homogeneous air circulation keeps the head always cool and dry. Hot air generated by the head temperature speed out to the outer surface and through the rear channels. The peak is flexable in order to avoid fractures during a fall.

CHIN STRAP

Five point harness fitted with the hardhat support system. The chinstrap directly inserted in the hardhat through three passing rings is completely smooth non-allergic and washable leather. The rivets are not in contact with the skin. This has been studied to avoid skin disorders.

INNER PAD

The one piece inner padding is attached to an anatomic cushion that perfectly fits the nape ensuring optimum comfort and absolute air diffusion thanks to the high-tech materials used: Coolmax coupled with open-cells filter and smooth Sanitized treated micro-fibre. The inner pad can also be bought seperately as a spare-part.

REMOVE AND REPLACE THE INNER PAD

1. Raise the front part and then the lateral parts of the padding stick from the helmet.

2. Detach the inner pad from the Velcro placed on the foan.

3. Remove the pad. Once the pad is washed and dry fit in again, the lateral parts of the padding stick in again. The central part of the stick remains partly lifted so as to allow air flow.

4. Dress again the rest of the pad inside the crown with a light pressure of the hands over the velcro placed on the lateral and rear parts of the foam.